Tiger Select - Benzene and TACs detector
A revolutionary hand-held detector, Tiger Select can be operated either with a benzene pre-filter tube to detect benzene selectively, or without to detect total aromatic compounds (TAC). For simplicity and ease of use, the Tiger Select has been split into two, user-friendly modes: Basic and Advanced. Both modes are user-selectable. Utilizing the high output Ion Science 10.0 eV lamp configuration, a reading for total aromatic compounds (TACs) is seen immediately on start-up. Should aromatics be detected, an Ion Science benzene prefilter tube can be easily attached to ensure rapid detection and selective measurement of benzene.
Tiger Select can also provide 15 minute short term exposure limits (STELs) and 8 hour time weighted averages (TWAs) for TACs. Throughout the measurement process, Tiger Select continues to display real time data, ensuring the final reading represents the full value of actual benzene present. Benzene concentrations are displayed down to ppb levels, giving you the most accurate, reliable data you can count on. In addition, the unique MiniPID 2 sensor incorporates both anticontamination technology and Fence Electrode technology for extended operation in difficult working environments.
Tiger Select can also be used in standard operational mode without the use of a benzene pre-filter tube to deliver active indications of volatile organic compounds (VOCs), including benzene at concentrations as low as 1 ppb benzene equivalent. Additionally, Tiger Select may be used alongside the CubTAC personal PID monitor to provide the ultimate solution for benzene detection.
With the optional AutoLog + Push to log function, the Tiger Select can record up to 120,000 values on the internal memory for a continuous log estimated at over 80 days. You can activate the automatic logging function or record the values only when you want with the Push to Log.
Ion Science provides a range of Tiger Select kits to suit your requirements, along with an exclusive range of accessories. Further details can be found below.
- Tiger Select instrument
- Rechargeable battery (Li-ion)
- Battery charger and mains adapter
- Rubber boot
- Explorer case
- Benzene pre-filter tubes
- Tiger Select manual
- Tiger Select Quick Start Guide
- Benzene pre-filter tube opener
- Carbon filter assembly
- PTFE filter discs
- Removable tool for MiniPID stack
- Sample cleaning compound
- Calibration adapter
- Sensor seal – coated
- 20000 ppm or 20000 mg(m3 (gas dependent)
- Response time
- 120 seconds
- 10,0 eV Krypton PID lamp
- ± 5% display reading - ± one digit
- Battery life
- 24 hours continual use
- Flow rate
- ≥ 220 ml/min (with blocked flow alarm)
- -20 to 60 °C
- H:465 mm W:89 mm D:61mm
- 0,72 kg